It is the perfect solution to connect a small group of PCs to a high-speed broadband Internet connection. The schedule rule s have priority over your Connection settings. Enter a port number in this field. The Rear Ports 2. Frequent loss of Ensure that all other devices connected to the same ADSL linesync telephone line as your router e.

Uploader: Muran
Date Added: 12 May 2012
File Size: 13.99 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 67957
Price: Free* [*Free Regsitration Required]

BEC Series User`s manual |

Outside users can browse inside web servers directly while it is protected by NAT. Table of Contents Add to my manuals Add. Create a port forward entry.

Lit when power is ON. It is case sensitive and must not excess 32 characters. But in some area, multimode cannot detect the ADSL line code well. User can select Single or Multiple.

Security checklist for BEC-technologies 5102 ADSL router

LAN port IP address. You may also reset your router to factory settings by holding the small Reset pinhole button on the back of your router in for seconds whilst the router is turned on. If you cannot resolve the problem with the Troubleshooting chapter, please contact the dealer where you purchased this product.


Select Allow Association to permit access to the router, MAC addresses not listed will be denied access to the router. It is recommended that this option be configured by an advanced user.

Home – BEC Technologies, Inc.

Default setting is set to Activated. This field displays the number of frames transmitted in mpdem last second. Factory Default Settings 3. In this turn on the router.

But in some area, multimode cannot detect the ADSL line code well.

You need to know the MAC address of the devices to configure this screen. Verify that the Mode address and the subnet mask are consistent between the router and the workstations. The Front Leds 2.

Multi-users can have high-speed Internet access simultaneously. Type your e-mail address. This field displays the number of avsl received in the last second. This is equivalent to Many to One i. As set in default setting, it disables the DMZ function. Type an IP address to restrict access to a client with a matching IP address. WEP Key 1 to Key 4: Security is a continuous process Just keep in mind to change the passwords often or at least once afsl every 6 months!


Type the new password in this field Confirm Password: You must configure all four keys, but only one key can be activated at any one time. Select Deny Association to block access to the router, MAC addresses not listed will be allowed to access the router. This field displays the number of total PDU transmitted in the last second.

This field displays the type of port Transmit Frames: This is item number Interface: In the picture above the address bar has Counter for access times.

The screen appears as shown.